3DXTECH ThermaX Natural PEKK 3D Printing Filament – (0.5kg) 1.75mm

PEKK comes from the same family of high-performance thermoplastics as the well-known PEEK. 3DXTECH’s ThermaX PEKK 3D Printing Filament was created to bring this aerospace-grade material to your personal 3D printer. Use ThermaX PEKK 3D Printing Filament for the most demanding applications in the most extreme environments where thermal resistance, mechanical strength, and chemical stability are critical requirements.

TECHNICAL SPECIFICATIONS

Diameter tolerance: +/- 0.05mm

Printing temperature: 345 – 375°C (all-metal extruder)

Bed temperature: 120-140°C

Enclosure temperature: 70-150°C

Printing surface: PEI Tape, Stick Stick on clean glass

Dry at 120°C for at least 4 hours before use

Anneal at 160°C for at least 30 minutes, or until the transparent golden color of the finished 3D print turns completely opaque tan (see image above)

Download the SDS and TDS